• APF Front Wing

    APF Front Wing

    €550.00 – €600.00

    Armstrong APF Front Wing: A Revolution in Accessible Foiling Effortless Flight Starts Here The Armstrong APF Front Wing is more than just a new addition to Armstrong’s elite foil lineup—it’s a statement. Designed specifically for entry-level and progressing riders, the APF (Accessible Pump Foil) delivers the lift, stability, and smooth acceleration that make flying feel second nature. For the first time, you can experience high-performance foiling without battling a learning curve that feels more like a cliff.APF Front Foil Because Armstrong is known for pushing design boundaries, the release of the APF series marks a shift. It’s not aimed at pros chasing podiums—it’s engineered for everyday foilers, weekend warriors, and first-timers who demand reliability, predictability, and progression potential. However, don’t mistake accessibility for mediocrity. This wing was built with the same attention to performance, materials, and detail as every Armstrong component—just tuned for low-speed, high-control flight.APF Front Foil Why the Armstrong APF Front Wing Matters APF Front Foil Designed for First Lift, Not First Limits Although many foil wings claim to be beginner-friendly, few deliver true ease without compromising performance later. That’s where the Armstrong APF Front Wing shines. It offers slow-speed lift, intuitive handling, and ultra-stable tracking. Additionally, it retains agility, pumpability, and system compatibility that allow riders to grow into more advanced disciplines—without needing to replace everything. This wing thrives in low-speed environments like dock starts, flatwater pumping, beginner wing foiling, and small-surf prone riding. It’s also a standout choice for heavier riders who need more surface area without sacrificing control. APF = Accessible Pump Foil, Not Average Performance Foil What Does APF Stand For? A = Accessible — Easy for new riders to use, without constant balance correction P = Pump — Tailored for efficient dock starts, flatwater pumps, and glide connections F = Foil — Optimized hydrodynamics for smooth lift and flow at the lowest planing speeds Unlike performance-tuned HA or MA wings, the Armstrong APF Front Wing encourages success at lower speeds. Consequently, the foil lifts earlier, holds lift longer, and lets you focus on movement—not micro-adjustments. Whether you’re taking your first step into foiling or teaching someone else, this wing changes the game. A Closer Look: What Sets the APF Front Wing Apart Massive Low-End Lift The APF series boasts an ultra-high lift coefficient, which allows it to rise even when moving slowly. This makes waterstarts easier, minimizes energy expenditure, and enables dock-start foiling without elite-level leg strength. Riders immediately notice the difference: lift comes smoothly, without the harsh surges found in more advanced wings. Moreover, this trait opens the door for: ✅ Easier dock starts ✅ Slower takeoffs for beginners ✅ Boosted carry between small swell bumps ✅ Reduced sink rate during glides Pitch-Stable at Any Speed Unlike twitchy high-aspect wings, the Armstrong APF Front Wing resists sudden pitch changes. That means when you accelerate, glide, or shift stance, the foil remains stable underfoot. As a result, riders can focus on body movement and energy flow instead of constant correction. This feature is especially critical when: Learning to balance after lift Linking multiple dock-starts Maintaining height while pumping Coaching others in their first sessions APF Front Foil Forgiving Stall Characteristics Every rider stalls a foil—it’s part of learning. But the APF doesn’t punish you for it. Because of its generous chord and well-rounded camber, it reattaches quickly when lift is lost. That gives you a chance to correct mistakes before crashing down.Armstrong APF Front Wing In fact, the APF’s stall behavior has been praised by instructors worldwide. New foilers get more ride time, less frustration, and faster progression—making it ideal for schools, demo fleets, and dedicated learning environments.  Built on Armstrong’s A+ Modular Platform True to Armstrong form, the APF wing isn’t a throwaway beginner product—it’s a lifelong part of your quiver. It fits seamlessly into Armstrong’s A+ system, meaning you can pair it with different stabilizers, fuselages, and masts as your skills evolve. Want to transition from dock starts to wing foiling? You can. Need to swap in a new tail wing for more pump power or glide control? No problem. With the Armstrong APF Front Wing, you’re not stuck—you’re set up to grow.  Robust Carbon Construction Built to Last Even though it’s designed for new riders, the APF doesn’t compromise on durability. Constructed with Armstrong’s premium high-modulus carbon layup, reinforced with titanium hardware interfaces, this wing handles abuse—from flatwater to impact zones—with confidence. That means: ✅ No twist under load ✅ No bubbling under heat ✅ No wobble after seasons of use It’s a long-term investment in your foiling journey—whether you’re riding solo or teaching others to fly. APF Model Sizes & Target Use Model Surface Area Primary Use Ideal Rider Weight Why It Works APF 1880 ~1880 cm² Dock starts, pump, beginner wing 60–95kg Balanced control, ideal learning wing APF 2180 ~2180 cm² Pumping, heavier rider support 90–120kg+ Ultimate float + lift for max forgiveness and glide Both models feature thick profiles, soft tips, and stable span distribution to promote predictable, clean lift and smooth transitions, even at low speeds.mast performance Who Is the Armstrong APF Front Wing For? 🧠 First-time foilers looking for an easier entry 💪 Heavier riders needing extra lift and forgiveness 🏄 Instructors and coaches training new riders 🏞️ Explorers seeking slow-speed glide for longer rides 👨‍👩‍👧‍👦 Families or schools building community access to foiling 🎯 Dock-start athletes refining flatwater techniques with efficiency Armstrong APF Front Wing: Real-World Performance & Rider Insights Smooth Lift & Consistent Glide at Low Speeds In actual riding conditions, the Armstrong APF Front Wing demonstrates exceptional lift even at the slowest speeds. Because of its high-volume design, it lifts quickly off the water, significantly reducing the effort required during dock starts and flatwater pumping. This immediate lift allows riders to focus more on balance and less on brute strength.wing board Additionally, the glide feels smooth and steady. The foil maintains height effortlessly over small bumps, reducing the energy needed to maintain speed. As a result, riders experience longer, more enjoyable…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • CF V2 Front Wing

    CF V2 Front Wing

    €290.00

    Armstrong CF V2 Front Wing: Introduction & Product Overview Redefining Foiling Performance The Armstrong CF V2 Front Wing stands at the forefront of foiling innovation. Designed for riders who demand a blend of speed, stability, and precision, this wing elevates the experience across multiple disciplines. Whether you’re wing foiling, prone foiling, or SUP foiling, the CF V2 delivers outstanding responsiveness and effortless control. Engineered for Versatility and Power Unlike entry-level wings, the CF V2 caters to intermediate and advanced riders seeking to push boundaries. Its refined hydrodynamic profile minimizes drag while maximizing lift, allowing longer rides with less effort. Moreover, the wing’s stiffness ensures immediate power transfer, providing confident handling even in challenging conditions.prone foil boards Superior Carbon Construction Built with Armstrong’s proprietary high-modulus carbon fiber and a precision CNC-milled foam core, the CF V2 combines light weight with exceptional durability. This construction reduces flex under load, resulting in enhanced control and consistent performance. Additionally, the wing is treated with UV-resistant coatings that prolong its lifespan. Seamless Modular Compatibility The CF V2 Front Wing integrates perfectly with Armstrong’s modular A+ system. This means riders can customize setups by combining various fuselages, masts, and stabilizers to match their style and conditions. The modular design ensures your investment adapts as your skills evolve.prone foil boards Key Features at a Glance High-Performance Carbon Fiber: Lightweight yet stiff for precise handling CNC-Milled Foam Core: Guarantees consistent shape and lift characteristics Hydrodynamic Design: Low drag profile for efficient glide and pumping Modular A+ System Compatibility: Easy customization and upgrades Durable UV-Resistant Finish: Long-lasting protection against elements Armstrong CF V2 Front Wing: Design & Engineering Insights Precision Engineering for Peak Performance The Armstrong CF V2 Front Wing was developed through extensive research, blending advanced materials with innovative design. Armstrong’s engineers focused on creating a wing that offers outstanding lift and control without compromising speed or agility. Carbon Fiber Construction: Strength Meets Lightness Armstrong utilizes high-modulus carbon fiber in a layered configuration that maximizes stiffness while keeping weight low. Consequently, the wing exhibits minimal flex, translating rider input into immediate, precise response. Additionally, the carbon layup is optimized to handle varying stresses encountered during pumping and carving maneuvers. CNC-Milled Foam Core: Consistency and Durability At the core of the CF V2 lies a CNC-machined closed-cell foam core, which ensures exact dimensional tolerances. This precision manufacturing reduces variances that could affect lift or stability. Furthermore, the foam core contributes to the wing’s light overall weight while maintaining structural integrity. Hydrodynamic Optimization The wing’s shape was refined using computational fluid dynamics (CFD) simulations and real-world testing. As a result, the camber and thickness distribution promote smooth water flow, minimizing drag and delaying stall. Transition zones between the main wing body and wingtips are carefully sculpted to reduce vortex formation, enhancing overall efficiency. Modular System Compatibility Designed to work seamlessly with Armstrong’s A+ modular components, the CF V2 attaches easily to a variety of fuselages, masts, and stabilizers. This modularity allows riders to tailor their setup precisely for different disciplines or conditions without replacing the entire foil. Quality Control and Environmental Considerations Armstrong implements rigorous quality control procedures at every production stage to ensure consistent performance. Moreover, the company prioritizes sustainable practices, employing eco-friendly resins and minimizing waste. This commitment extends the wing’s lifecycle and supports environmental responsibility. Armstrong CF V2 Front Wing: Performance Across Conditions Superior Speed and Glide Efficiency The Armstrong CF V2 Front Wing delivers remarkable speed and glide, thanks to its high aspect ratio and hydrodynamic design. Riders experience reduced drag, enabling faster acceleration and sustained top-end speed. Moreover, even at lower speeds, the wing maintains efficient lift, allowing smooth rides with minimal pumping effort. Stability in Choppy Waters When faced with rough or choppy conditions, the CF V2 remains stable and predictable. Its optimized wing shape cuts through waves, dampening vibrations and preventing sudden stalls. Therefore, riders maintain confidence and control, even during aggressive maneuvers in challenging environments.CF V2 Front Foil Responsive Handling for Technical Maneuvers Thanks to its stiff carbon construction and refined shape, the CF V2 offers precise, responsive handling. Riders can execute sharp turns, quick transitions, and complex tricks with ease. Additionally, the wing’s design supports smooth energy transfer, making advanced maneuvers feel natural and fluid.CF V2 Front Foil Efficient Pumping for Extended Sessions The wing’s hydrodynamic profile maximizes pumping efficiency by converting rider input into forward momentum with minimal loss. This reduces fatigue and extends session duration. Furthermore, its forgiving stall characteristics assist riders in maintaining momentum through transitions and varied water conditions.CF V2 Front Foil Versatility Across Foiling Disciplines Due to its modular design and adaptable size options, the Armstrong CF V2 excels in wing foiling, prone foiling, and SUP foiling. This versatility makes it an ideal choice for riders who engage in multiple disciplines or seek a single wing that performs well across diverse conditions.CF V2 Front Foil Rider Testimonials Rider Location Discipline Feedback Summary Mark S. Maui, Hawaii Wing Foiling “The CF V2’s speed and control transformed my rides.” Emma L. Cape Town, SA Prone Foiling “Stable in chop and responsive for tight turns.” Lucas P. French Riviera SUP Foiling “Less fatigue and smoother pumping on long rides.” strong CF V2 Front Wing: Rider Profiles & Use Cases Ideal for Intermediate to Advanced Foilers The Armstrong CF V2 Front Wing is engineered for riders who have progressed beyond the beginner stage and desire enhanced performance. Its blend of speed, lift, and control makes it a top choice for those aiming to refine their skills or compete. Rider Profiles Rider Type Skill Level Typical Use Benefits of CF V2 Wing Intermediate Rider Intermediate General foiling, progression Balanced lift and stability to build confidence Advanced Rider Advanced Aggressive carving, freestyle Responsive handling and high-speed glide Competitive Racer Expert Racing on flat water and open ocean Maximized speed and efficient pumping SUP Foiler Intermediate-Expert Long-distance and fitness rides Smooth pumping and stable glide Use Cases Scenario Why CF V2 Excels Recommended Setup Flatwater Racing High aspect ratio reduces drag for…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • DWP Front Wing

    DWP Front Wing

    €700.00

    Armstrong DWP Front Wing Designed for Downwind and Wave Performance The Armstrong DWP Front Wing is expertly engineered to excel in downwind and wave foiling conditions. Its advanced design offers a harmonious blend of lift, speed, and control, allowing riders to effortlessly harness ocean energy. Consequently, the wing provides exceptional glide and pumping efficiency, reducing rider fatigue during extended sessions.DWP Front Foil Cutting-Edge Carbon Fiber Construction Built with Armstrong’s proprietary high-modulus carbon fiber and CNC-milled foam core, the DWP wing balances lightweight agility with robust strength. This combination ensures minimal flex while maintaining durability, thus delivering precise responsiveness even in challenging surf or downwind runs.DWP Front Foil Hydrodynamic Efficiency for Smooth Ride The wing’s shape is optimized using state-of-the-art computational fluid dynamics (CFD) to reduce drag and maximize lift. Furthermore, the carefully sculpted wingtips minimize vortex formation, enhancing stability and allowing smoother turns. These design features translate into better control, whether carving waves or charging downwind. DWP Front Foil Seamless Integration into Armstrong’s Modular System Compatibility with Armstrong’s modular A+ system enables easy customization of your foil setup. By combining the DWP Front Wing with various fuselages, masts, and stabilizers, riders can adapt their gear to specific conditions or preferences. This flexibility extends the wing’s utility across multiple foiling disciplines, including wing foiling, prone foiling, and SUP foiling. DWP Front Foil Key Features at a Glance High-modulus carbon fiber construction for strength and lightness Precision CNC-milled foam core ensures consistent shape and performance CFD-optimized hydrodynamic profile reduces drag and improves lift Advanced wingtip design for enhanced stability and maneuverability Full compatibility with Armstrong A+ modular system for customization Durable UV-protective coating extends lifespan in harsh conditions Armstrong DWP Front Wing: Design & Engineering Details hyperlite wakesurf shim Precision Engineering for Peak Efficiency The Armstrong DWP Front Wing was meticulously designed to optimize downwind and wave foiling performance. Armstrong’s engineering team combined advanced materials with innovative shaping techniques to achieve superior lift and stability without sacrificing speed.hyperlite wakesurf shim Carbon Fiber Construction: Strength Meets Lightness Armstrong employs high-modulus carbon fiber arranged in a multi-directional layup. Consequently, the wing offers exceptional stiffness, which ensures that rider input is transmitted instantly and accurately. At the same time, weight is kept to a minimum, promoting effortless maneuverability. CNC-Milled Foam Core for Consistent Shape The wing’s core is crafted from precision CNC-milled closed-cell foam. This manufacturing process guarantees uniform thickness and shape across every wing produced, which translates into consistent hydrodynamic performance. Moreover, the foam core adds structural integrity while maintaining an ultra-light overall weight. Hydrodynamic Optimization through CFD Using computational fluid dynamics (CFD), Armstrong refined the wing’s camber, thickness distribution, and wingtip geometry. This approach minimizes drag and delays flow separation, allowing for longer, smoother glides. Additionally, the wingtip design reduces vortex generation, resulting in enhanced stability and responsiveness during turns. Modular System Compatibility Designed to integrate perfectly with Armstrong’s A+ modular system, the DWP Front Wing can be combined with various fuselages, masts, and stabilizers. This modularity allows riders to tailor their setup to specific conditions or disciplines, enhancing versatility and value. Durability and Environmental Considerations The wing is finished with a UV-resistant coating that protects the carbon fiber from sun damage and environmental wear. Armstrong also applies sustainable manufacturing practices, including eco-friendly resins and waste reduction, which reflect the brand’s commitment to responsible production.   Armstrong DWP Front Wing: Performance Analysis Built for Endless Glide and Maximum Flow The Armstrong DWP Front Wing delivers phenomenal performance across downwind and wave foiling conditions. Its high aspect ratio and advanced hydrodynamic shape ensure prolonged glide with minimal input. Riders experience reduced resistance and greater forward momentum, making long-distance runs feel smooth and efficient. downwind sup foil Speed Without Sacrificing Control Although optimized for glide, the DWP also offers impressive speed. Riders accelerate easily in swell or wind-driven chop. Moreover, the wing remains stable at higher velocities, allowing foilers to maintain control when carving, pumping, or navigating tight lines. Its stiffness ensures immediate response, even under pressure. downwind sup foil Effortless Pumping Efficiency Thanks to its efficient foil section and lightweight construction, the DWP Front Wing excels at low-energy pumping. Whether riding in marginal conditions or connecting bumps on a downwind run, the wing requires minimal effort to stay flying. As a result, riders experience less fatigue and longer sessions. Seamless Wave Engagement In wave environments, the DWP wing offers unmatched responsiveness and flow. It engages early, making takeoffs smooth and predictable. Additionally, it allows fluid transitions from bottom turns to top turns without losing lift or speed. Its wide wingspan enhances drive while still delivering sharp, reactive turns when needed.downwind sup foil Open Ocean Mastery Riders tackling open-ocean downwinders benefit from the DWP’s superior glide ratio. With each bump or swell, the wing provides continuous lift and momentum. Furthermore, its stability in variable water states—such as wind swell, chop, or ocean rollers—makes it a favorite for endurance-focused foilers.downwind sup foil Side-by-Side Performance Attributes Attribute Performance Rating Remarks Glide Efficiency ⭐⭐⭐⭐⭐ (5/5) Extended glide even at low speed Pumping Ease ⭐⭐⭐⭐⭐ (5/5) Low effort, smooth cadence Turning Response ⭐⭐⭐⭐☆ (4.5/5) Tight carve potential despite high aspect ratio Speed Stability ⭐⭐⭐⭐⭐ (5/5) Rock-solid under acceleration Wave Performance ⭐⭐⭐⭐⭐ (5/5) Ideal for linking sections and carving rail-to-rail Downwind Capability ⭐⭐⭐⭐⭐ (5/5) Exceptional for long runs with minimal power input Real-World Feedback “The DWP changed how I ride open-ocean swells. It just wants to fly—forever.”— Noah R., downwind rider, Maui “I used to get tired mid-run. Now, I can pump and glide for miles without feeling drained.”— Carla M., SUP foiler, Portugal Armstrong DWP Front Wing: Setup & Compatibility Seamlessly Integrated, Fully Modular The Armstrong DWP Front Wing is designed for effortless integration within the Armstrong A+ modular foil system. As a result, it offers maximum flexibility for customizing your setup across disciplines like SUP foiling, prone foiling, and wing foiling. Whether you’re dialing in for glide, carving control, or low-speed lift, the DWP connects flawlessly to Armstrong’s fuselages, masts, and stabilizers. Compatible Components at a Glance…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • HA Front Wing

    HA Front Wing

    €430.00 – €550.00

      Armstrong Foil HA Front Wing: Unleashing High Aspect Mastery Precision in Motion: Designed for Riders Who Demand More When pushing the boundaries of hydrofoil performance, every millimeter matters. The Armstrong Foil HA Front Wing is not just a refined piece of gear—it’s a direct reflection of relentless innovation, field-tested efficiency, and elite-level hydrodynamic intelligence. From glide to carve, from swell to sprint, this front wing elevates what’s possible on the water.HA Front Foil Although it stems from Armstrong’s acclaimed lineage, the HA (High Aspect) series stands apart. It caters to those who don’t simply ride—they engineer motion with every pump, carve, and transition. Whether you’re racing offshore, linking endless bumps, or gliding silently through flatwater, the Armstrong Foil HA Front Wing rewards your skill with elite precision. Born From Need, Built for Flow Why the High Aspect Revolution Matters Not long ago, riders had to choose between two extremes—either low-aspect foils with stable lift and low top-end or race-oriented profiles that sacrificed stability for glide. Armstrong saw a better path. Therefore, the HA series was born.HA Front Foil By harmonizing extreme glide with user-friendly behavior, the Armstrong Foil HA Front Wing bridges the gap. It unlocks the high-efficiency zone while remaining manageable, even forgiving, underfoot. You don’t need elite conditioning to make it work. You simply need the desire to ride further, faster, and with more finesse. Moreover, armstrong performance mast engineers used fluid dynamics simulations, real-world prototypes, and feedback from global pros to create a front wing that glides with less effort, carves with less resistance, and soars with more soul. What Makes the  HA Front Wing Exceptional? Glide Efficiency That Feels Infinite One of the HA’s defining traits is its absurdly high glide ratio. Because of its ultra-thin profile and extended wingspan, the foil slices through water with minimal drag. As a result, it maintains lift far longer than traditional mid-aspect foils.HA Front Foil You’ll notice it the moment you step off a wave and start pumping. Even with moderate energy, the HA Front Wing carries your motion with smooth extension. This allows you to: Connect swells more easily Maintain trim in low-wind wing sessions Travel further with fewer strokes or pumps Additionally, the reduced drag makes it easier to ride with a neutral stance—freeing up mental space for line choice, transitions, or creative tricks.HA Front Foil Ultra-Stable High-Speed Control Many high-aspect wings feel twitchy at speed. The Armstrong Foil HA Front Wing, however, remains balanced and predictable. Because its twist profile and span loading were optimized through fluid modeling, stability is baked into its DNA.armstrong performance mast Even during powered wingfoil sessions or strong downwind glides, the HA’s pitch and yaw axes remain steady. You’ll glide with confidence, especially when banking into long carves or transitioning on open water.armstrong performance mast More importantly, it delivers this control without sacrificing roll agility. Riders can still initiate smooth arcs or tight turns—without the wing stalling out unexpectedly.  Effortless Takeoff and Recovery High-aspect designs often struggle during takeoff or recovery. However, Armstrong engineered the HA wing with an enhanced entry curve. Therefore, even at slower speeds, water attaches efficiently to the foil surface—producing lift earlier and more predictably.downwind foil board This design choice helps in two big ways: First, it enables easier water starts for dock and pump foilers Second, it makes re-entry from touch-downs far less violent or abrupt Whether launching from flatwater or recovering mid-glide, the Armstrong Foil HA Front Wing keeps things smooth. downwind foil board Hydrodynamic Harmony From the camber curve to the tip taper, every contour of this foil was shaped for laminar flow. The result? You experience clean water attachment, reduced cavitation risk, and a noticeable increase in handling consistency. This fluid harmony is most obvious when: You hit bumps or chop mid-run but the foil doesn’t ventilate You transition between low and high-speed zones with no lurch or stall You bank hard and still get reliable lift through the arc Additionally, the HA’s profile avoids excessive flex. Unlike less-refined carbon wings, it won’t feel spongey under load. Instead, you get crisp feedback and clear control at every phase of the ride.  Precision Craftsmanship = Lifetime Value Constructed with Armstrong’s signature high-modulus carbon layup and titanium-reinforced mounting points, the HA wing isn’t just precise—it’s bombproof. That means less worry about wear, warping, or breakdown—even if you ride hard every session.downwind foil board Moreover, the modular design integrates seamlessly with Armstrong’s fuselages, stabilizers, and masts. That way, your investment in the Armstrong Foil HA Front Wing becomes part of a system—not an isolated purchase. Quick Highlights: What You’ll Love About the HA Front Wing ✅ Superb Glide Efficiency – Link swells, save energy, travel farther ✅ Neutral High-Speed Stability – Glide without twitch or drag ✅ Responsive Pump Power – Minimal effort, maximum return ✅ Modular Compatibility – Fits Armstrong’s ecosystem perfectly ✅ Durable Carbon Construction – Ride hard, trust your gear ✅ Effortless Water Re-Entry – Soft touchdowns, quick recoveries The Rider’s Wing, Engineered for the Long Haul Ultimately, the Armstrong Foil HA Front Wing isn’t just a performance upgrade—it’s a mindset shift. Once you ride it, everything changes. Waves link smoother. Wind becomes more forgiving. Your rides last longer, your carves grow sharper, and your foiling feels more like flying than ever before. So whether you’re looking to train, explore, or simply push your own limits, the HA Front Wing becomes your partner in performance. It amplifies your effort, rewards your progression, and inspires your next move—session after session.   Armstrong Foil HA Front Wing: Real-World Performance & Hydrodynamic Dynamics Engineered for Performance You Can Feel Although design is vital, true innovation reveals itself in the water. The Armstrong Foil HA Front Wing proves its worth not on paper, but beneath your feet. With every carve, glide, and swell link, its high-aspect DNA becomes undeniable. Glide farther, ride longer, and engage turns that feel like second nature—this foil isn’t just built for speed, it’s crafted for sensation.HA Front Foil From the…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • MA Mk II Front Wing

    MA Mk II Front Wing

    €470.00 – €600.00

    MA Mk II Front Wing Foil: Ultimate Precision in Hydrofoil Performance Elevate Every Ride with Next-Generation Control For riders who demand nothing less than excellence, the MA Mk II Front Wing delivers a unique blend of balance, control, and versatility. Whether you’re carving glassy surf, chasing wind swell offshore, or foiling flatwater lakes, this front wing was engineered to redefine performance in every condition. Moreover, this isn’t just an upgrade—it’s a complete evolution of the high-aspect foil experience. With refined outlines, optimized profiles, and a lift-to-drag ratio that feels supernatural underfoot, the MA Mk II Front Wing offers a new frontier in feel, flow, and freedom. Why the MA Mk II Front Wing Foil Stands Apart A Quantum Leap in Design At the heart of Armstrong’s innovation lies this truth: performance must always meet precision. Therefore, the MA Mk II Front Wing doesn’t just improve on its predecessor—it changes the game entirely. Crafted using aerospace-grade carbon construction, this foil is stiff, responsive, and shaped to adapt instantly to your body’s input. Furthermore, Armstrong’s team focused relentlessly on the flow state of a rider. That’s why the MA Mk II profile allows for earlier lift, higher efficiency through turns, and exceptional glide—without compromising agility. Even in gusty or turbulent waters, this foil remains composed, intuitive, and ultra-fast. MA Mk II Front Wing Perfect for Every Discipline From wing foiling to prone surf and SUP foiling, the Armstrong MA Mk II Front Wing Foil transitions across disciplines with ease. Its geometry was modeled through computational fluid dynamics (CFD), then honed in real-world testing over hundreds of sessions. As a result, you get:MA Mk II Front Wing Swift pump return for dock starts or downwind linking Graceful carving arcs that remain steady through acceleration Excellent stall resistance and low-speed control Thus, whether you’re just breaking into foiling or you’re chasing podium finishes, this front wing will exceed expectations.MA Mk II Front Wing Precision Hydrodynamics Meet Unmatched Durability Refined Outline and Profile The redesigned wing shape brings greater torsional stiffness and refined flex response. So, you benefit from tighter feedback loops between rider input and foil action. As water speeds shift, the MA Mk II maintains lift symmetry, giving you full trust in unpredictable environments. Additionally, a slightly narrower chord and updated leading edge contour help maintain laminar flow longer. You’ll notice it immediately—smoother acceleration, faster glide, and a seamless transition between pumping and carving. Techno Carbon Construction You Can Count On Armstrong’s commitment to materials is legendary. That’s why the MA Mk II Front Wing Foil uses: High-modulus carbon with directional layup CNC-machined cores for consistent foil section thickness Ultra-lightweight yet impact-resistant bonding Every square inch is designed to withstand repeated pressure cycles, flex torque, and UV exposure without warping or performance loss. Because when you’re flying, dependability isn’t optional—it’s everything. Designed for Riders, by Riders Input from the World’s Best Foilers Behind the MA Mk II is a team of elite riders, engineers, and designers who live for the foil. Their firsthand feedback during testing led to vital adjustments in twist profiles, tip sweep, and drag reduction. Ultimately, this means you get a product that responds like it’s reading your mind—because it was shaped by those who know the feeling best. Adaptable to Your Setup Another key advantage? The MA Mk II’s modular mounting system. It integrates seamlessly with Armstrong’s existing fuselage and mast lineups. Therefore, upgrading your foil won’t force you to reinvest in every component. Just bolt, ride, and fly. Performance That Scales With You Whether you’re an intermediate learning tight transitions or an advanced foiler linking endless glides, this wing scales alongside your growth. Because of its progressive lift profile, it offers stability in slower speeds and explosive response as you increase tempo. Therefore, the Armstrong Foil MA Mk II Front Wing Foil becomes a long-term investment—one that grows with your confidence and skill. Key Features at a Glance ✅ Precision-Tuned Hydrodynamic Design – CFD-tested and real-world refined ✅ High Modulus Carbon Construction – Durable, lightweight, and responsive ✅ Wide Application Compatibility – Wing, SUP, surf, and downwind foil disciplines ✅ Modular Mounting System – Futureproof your setup without extra costs ✅ Early Lift with Superior Glide – Carves smoothly and pumps effortlessly ✅ Performance Stability – Equally forgiving and fierce Final Thoughts: The Pinnacle of Wing Foil Innovation Ultimately, the Armstrong Foil MA Mk II Front Wing Foil was made for those who crave more—more glide, more control, and more flight time. From novice dreamers to seasoned chargers, this foil doesn’t just meet expectations—it smashes them. So if you’re serious about elevating your riding experience, it’s time to unlock the most advanced front foil in Armstrong’s lineup. Armstrong Foil MA Mk II Front Wing Foil: Performance & Design Breakdown Where Performance Becomes Instinct Although many foils promise to transform your ride, few actually do. The Armstrong Foil MA Mk II Front Wing Foil, however, redefines what high-performance means on the water. Every element—its camber, thickness, aspect ratio, and edge contours—was obsessively tested and tuned. Consequently, what you get is not just a foil that performs—it becomes an extension of your instincts. This part explores exactly how that transformation occurs, and why it remains unmatched in today’s foiling landscape. Flight Characteristics: Balanced, Predictable, Fierce Early Lift, Instant Feedback From your very first pump, the MA Mk II lets you feel the foil’s eagerness. Lift engages with minimal effort, thanks to a fine-tuned entry curve on the leading edge. Although many foils require aggressive body mechanics to launch, this one rewards subtle input. In fact, pilots report noticeable low-speed lift with smoother takeoffs and gentler touchdowns. That’s not by accident—it’s the result of refined geometry that maximizes pressure distribution across the span. Moreover, transition moments (such as lift-off and touchdown) happen cleanly. There’s little turbulence, no sketchy snap-up behavior. So beginners gain confidence, and advanced riders gain precision. Glide Efficiency Meets Control As you accelerate, the wing transitions into a gliding machine. With its mid-to-high aspect ratio and lower drag…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • MMCP900 Front Wing

    MMCP900 Front Wing

    €280.00

    MMCP900 Front Wing The Armstrong MMCP900 Front Wing stands at the forefront of modern foiling design, engineered with the progressive rider in mind. Bridging innovation and performance, it offers a multi-discipline solution capable of excelling across a spectrum of foiling styles—be it wing, prone, tow, or SUP. Carefully developed for advanced glide characteristics, ultra-smooth lift, and rock-solid stability, the MMCP900 opens a new realm of responsiveness for intermediate and expert foilers. Crafted for dynamic watermen and women who demand seamless transitions between disciplines, this front wing becomes a cornerstone of versatility. In contrast to discipline-specific wings, the MMCP900 adapts easily to your ambitions, regardless of riding style. Whether you’re seeking graceful open-ocean glide or aggressive carving in overhead surf, this wing stands ready. Its design is a direct result of Armstrong’s rider-informed R&D methodology. Real-world conditions, exhaustive prototyping, and direct input from elite foilers shaped every curve, contour, and connection. As a result, the MMCP900 is not only functional across varied terrain—it thrives under pressure. Furthermore, the MMCP900 integrates seamlessly with Armstrong’s trusted A+ System. This unlocks fine-tuning across mast lengths, fuselage options, and stabilizer pairings, giving riders complete control of their setup. From technical performance to long-distance efficiency, this front wing builds confidence and rewards progression. Core Value Propositions: Adaptive design for multiple foil disciplines Refined glide profile for speed, flow, and low drag Carbon layup with CNC core for precise response Balanced lift and pitch control in both flat and turbulent water Modular compatibility with Armstrong’s A+ System In summary, the MMCP900 is not just another carbon wing—it’s a meticulously crafted performance engine that empowers freedom, creativity, and progression across the water.   Armstrong MMCP900 Front Wing: Design & Engineering Details Advanced Carbon Construction for Precision and Strength The Armstrong MMCP900 Front Wing is constructed using Armstrong’s proprietary high-modulus carbon fiber layup combined with a CNC-milled closed-cell foam core. This manufacturing process ensures uniform thickness, superior stiffness, and a lightweight profile. Consequently, the wing responds instantly to rider inputs while remaining durable enough to withstand the rigors of diverse foiling conditions.sup downwind hydrofoiling Aerodynamic Foil Section and Optimized Span The MMCP900 features a carefully engineered foil section, optimized through extensive computational fluid dynamics (CFD) simulations. This allows the wing to maintain high lift-to-drag ratios, ensuring both speed and efficiency. Additionally, the wing’s 900 cm² surface area strikes the ideal balance between lift for low-speed pumping and streamlined performance at higher velocities.sup downwind hydrofoiling sup downwind hydrofoiling Innovative Wingtip Design to Reduce Vortices Armstrong’s distinctive wingtip design reduces tip vortices, which are a common source of drag and instability in foils. By minimizing vortex generation, the wing delivers smoother turns and improved directional stability. Moreover, this design increases overall hydrodynamic efficiency, helping riders maintain control in turbulent water. Weight-to-Strength Ratio: Engineered for Performance Despite its robust carbon fiber construction, the MMCP900 weighs significantly less than comparable wings in its class. This lightweight nature reduces inertia, allowing quicker maneuverability and less energy expenditure during pumping. At the same time, the wing’s structural integrity remains uncompromised, making it a reliable companion for demanding foiling sessions.sup downwind hydrofoiling Seamless Integration with Armstrong’s A+ Modular System The MMCP900 front wing is fully compatible with Armstrong’s A+ modular system, allowing riders to customize their setups effortlessly. By pairing the wing with a range of fuselages, masts, and stabilizers, users can adapt to changing conditions or disciplines. This modular approach extends the wing’s versatility and lifespansup downwind hydrofoiling Armstrong MMCP900 Front Wing: Performance Analysis Exceptional Lift and Glide Efficiency The Armstrong MMCP900 Front Wing excels in providing consistent lift across a wide range of speeds. Thanks to its refined foil profile and optimized surface area, riders enjoy extended glides with minimal effort. Consequently, it is easier to maintain momentum, reducing fatigue during long sessions. Smooth Acceleration and Top-End Speed This wing accelerates rapidly, allowing riders to catch waves or increase speed efficiently. Moreover, the low drag design supports high top-end velocity, which is crucial for riders seeking to push performance boundaries. Whether carving through surf or cruising downwind, the MMCP900 delivers smooth, reliable acceleration. Responsive Maneuverability in Variable Conditions Despite its size, the MMCP900 offers excellent responsiveness. The advanced wingtip design combined with lightweight construction enables quick, precise turns. As a result, riders can navigate small, medium, or large swell conditions with confidence and control. Low-Speed Stability for Easy Pumping One of the standout features of the MMCP900 is its stability at low speeds. This characteristic makes it ideal for riders who focus on pumping technique or foiling in flat water. Consequently, maintaining flight during slow sections becomes less challenging, encouraging longer rides and skill progression. Versatile Performance for Multiple Disciplines Whether you’re wing foiling, prone foiling, or SUP foiling, the MMCP900 adapts seamlessly. It balances lift, drag, and control to suit various riding styles. Thus, it is a highly versatile choice for riders who engage in multiple foiling disciplines or want a single wing to cover diverse conditions. Armstrong MMCP900 Front Wing: Rider Profiles & Use Cases Ideal for Intermediate to Expert Foilers The Armstrong MMCP900 Front Wing is designed to meet the needs of foilers with intermediate to advanced skill levels. Riders who have mastered basic pumping and control techniques will find this wing especially rewarding due to its balance of lift, speed, and maneuverability. Multi-Discipline Adaptability Rider Type Skill Level Discipline Why MMCP900 Fits Wing Foiler Intermediate to Expert Wing Foiling Efficient lift and smooth turns enhance flow and control SUP Foiler Intermediate to Expert SUP Foiling Stable low-speed pumping with quick acceleration Prone Foiler Intermediate to Expert Prone Foiling Responsive handling in waves and downwind conditions Tow-In Foiler Advanced Tow Foiling High-speed stability and strong glide for tow rides Weight-Based Wing Size Recommendations Rider Weight Recommended Wing Size Benefits Under 70 kg Standard MMCP900 Easy handling and quicker lift-off 70 – 90 kg Standard MMCP900 Balanced glide and control Over 90 kg Larger wing options (if available) Increased lift and stability at low speeds armstrong foil setup Use Case Scenarios…

    Add to cartDone
  • S1 Front wing

    S1 Front wing

    €280.00

    Armstrong S1 Front Wing Unleashing Next-Level Foiling Performance The Armstrong S1 Front Wing stands as a benchmark for high-performance foiling gear. Designed for expert riders and competitors, it combines aerodynamic precision, advanced carbon construction, and refined hydrodynamics to maximize speed, control, and agility. Whether you are carving aggressively or sprinting across open water, the S1 delivers unparalleled responsiveness that empowers every movement.kite armstrong Designed for Riders Who Demand More Unlike entry-level or progression wings, the Armstrong S1 targets riders seeking the ultimate edge. It thrives in high-speed conditions and tight turns, providing the feedback and stability necessary to push limits safely. Moreover, its design supports quick transitions, effortless pumping, and consistent lift, enabling riders to maintain momentum in dynamic environments.kite armstrong Cutting-Edge Construction Meets Innovation Built using Armstrong’s proprietary CNC-milled foam core, layered with premium uni- and bi-directional carbon fiber, the S1 balances exceptional stiffness with lightweight durability. This design minimizes drag while maximizing energy transfer, resulting in efficient glide and precise handling. Additionally, the hydrodynamic profile reduces turbulence, ensuring smooth, quiet rides even at top speeds. Modular Compatibility for Versatile Use The Armstrong S1 Front Wing is fully compatible with Armstrong’s modular A+ system, which means you can pair it with various fuselages, masts, and stabilizers to tailor your setup for different disciplines such as wing foiling, prone foiling, or SUP foiling. This flexibility ensures that your investment grows with your skills and riding preferences.kite armstrong Key Benefits at a Glance High Aspect Ratio Design: Enables superior glide and speed for advanced maneuvers Lightweight Carbon Composite: Reduces overall foil weight while maintaining rigidity Precision CNC Core: Ensures consistent shape and reliable lift generation Enhanced Hydrodynamics: Lowers drag and improves stability in choppy conditions A+ Modular System: Seamless integration with Armstrong components for customization  Design Philosophy & Engineering Pursuing Perfection in Every Detail The Armstrong S1 Front Wing embodies a relentless commitment to design excellence. Armstrong’s engineers combine scientific research, rider feedback, and cutting-edge technology to develop a wing that not only excels in performance but also redefines the riding experience. From the initial concept to final manufacturing, every aspect is scrutinized for maximum efficiency, durability, and responsiveness.S1 Front wing Aerodynamic Innovation The S1’s high aspect ratio shape was developed to reduce drag while increasing lift-to-drag ratio. As a result, riders gain smoother glide and enhanced speed, even in variable conditions. The wing’s camber profile was optimized to delay stall and maintain stable airflow across the surface, improving control during aggressive turns and rapid accelerations. Furthermore, the tapered wingtip reduces vortices that cause drag, allowing the S1 to slice through water with less resistance. These aerodynamic refinements deliver consistent lift across a broad speed range, enabling riders to push harder and ride longer. Advanced Carbon Construction Armstrong’s signature carbon construction combines uni-directional and bi-axial carbon fiber layers strategically placed to balance stiffness and flexibility. Consequently, the wing achieves impressive torsional rigidity that translates to direct power transfer from rider to water. Additionally, the carbon resin matrix has been carefully formulated to resist UV degradation and water absorption. This ensures that the wing’s structural integrity remains intact season after season, even with frequent saltwater exposure. Precision CNC-Milled Foam Core At the heart of the S1 lies a CNC-machined closed-cell foam core that guarantees dimensional accuracy and uniform thickness. This process eliminates inconsistencies common in hand-shaped cores, resulting in predictable lift and balanced performance. The foam core also contributes to the wing’s lightweight profile without compromising strength. Consequently, riders benefit from a responsive foil that is both durable and easy to maneuver. Modular Integration for Versatility Compatibility with Armstrong’s A+ modular system means the S1 can be paired effortlessly with a range of fuselages, masts, and stabilizers. This modularity allows riders to customize their setups for wing foiling, prone boarding, or SUP foiling disciplines. Moreover, the wing’s interface hardware employs titanium bolts and precision bushings, enhancing both connection stability and corrosion resistance. This careful attention to detail ensures seamless assembly and disassembly, simplifying travel and maintenance. Environmental and Quality Commitment Armstrong prioritizes sustainable manufacturing by using eco-friendly resins and minimizing waste during production. Each wing undergoes rigorous quality control, including stress testing and surface finish inspection, to meet the brand’s high standards. By focusing on longevity and repairability, Armstrong helps riders reduce their environmental impact while enjoying a premium foiling experience. Performance in Various Conditions Exceptional Speed and Glide Efficiency The Armstrong S1 Front Wing excels at delivering top-tier speed thanks to its high aspect ratio design and aerodynamic precision. Riders notice significantly reduced drag, enabling effortless acceleration across flatwater, open ocean, and wave environments. Furthermore, glide efficiency remains high even at lower speeds, allowing smooth, sustained rides without constant pumping. Stability in Choppy and Variable Waters When conditions become rough or unpredictable, the S1 maintains exceptional stability. Thanks to its refined camber and wingtip design, it effectively cuts through chop while dampening unwanted vibrations. Consequently, riders enjoy consistent lift and control, which fosters confidence during aggressive maneuvers and extended sessions.S1 Front wing Responsive Handling for Technical Maneuvers The wing’s torsional rigidity and precise hydrodynamics allow riders to execute sharp turns and quick transitions with ease. Whether carving tight waves or launching into freestyle tricks, the Armstrong S1 responds intuitively to input, making advanced maneuvers feel natural and controlled.S1 Front wing Pumping Efficiency and Energy Conservation The S1’s profile optimizes pumping efficiency by converting rider effort into forward momentum with minimal loss. This results in longer rides and less fatigue, especially in low-wind or flatwater conditions. Moreover, the wing’s forgiving stall characteristics help riders maintain momentum through tricky transitions.S1 Front wing Versatility Across Disciplines Due to its modular design, the Armstrong S1 Front Wing adapts seamlessly to wing foiling, prone foiling, and SUP foiling. This versatility makes it a favorite for riders who pursue multiple disciplines or seek a single wing capable of excelling in diverse environments. Rider Feedback & Testimonials Rider Location Discipline Feedback Summary Anna R. Maui, Hawaii Wing Foiling “The S1’s speed and responsiveness transformed my riding.” James…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page